MeshOTG V3

While supplies last!

Get a Free 1000mAh Battery if you can solder only!

You will need to solder a connector to the battery leads.

Please Note: The Primary source of power is the USB connector.

The Heltec Module has no dedicated ON/OFF switch and this battery will only serve as a short term backup to the OTG Cable to your phone, Power Bank or an AC adapter.

The battery should give you about 7 hours with the LCD always on - You don't have to unplug it all the time since it has under discharge protection. You can just charge it up right before your next adventure

Skip the Bluetooth Connection for added security and reliability - not to mention the required PIN and Power the unit directly from your Phone!

Features:

• Compact Size.
• Rugged Case.
• Carry Handle.
• Removable back cover for a Battery.
• OTG compatible for Direct USB connection.
• Great for use as an indoor Basestation by your window with the 12dBi extra long range antenna.

This unit can be used as a base station plugged in using the Micro USB connector with an AC adapter or on the go with your own supplied USB Power Bank or via your Phone's C connector with the provide cable.

Your phone connects to this unit via Standard Bluetooth or Bluetooth Low Energy which actually has a great range of up to 300 FT.

As shown in the main picture the unit can also be directly connected to the Meshtastic program without the need for Bluetooth using the OTG cable.

This unit connects to other radios in the group or “MESH” via LoRa 915MHz. All of the messages in the group are relayed from Radio to Radio so the actual range can be many miles depending on obstructions.

An Optional 12 dBi Antenna is available when being used as a Base Station at home.

An Optional 5 dBi Antenna (Round or Flat Tip Depending on stock) is available when being used for hiking ETC.

You can store the antenna in the snap on back cover or there is plenty of room to plug in your own battery too.

Included in the "Base Package"

• One custom printed Army Green 3D case by PRUSA that is Heat, UV and Moisture resistant.
• One snap on Back Cover.
• One One Meshtastic.org 868/915Mhz Heltec V2.1 LoRa32 based mesh communicator device.

https://www.thethingsnetwork.org/docs/lorawan/frequencies-by-country/

USA/Canada 915MHz

EU 868MHz